Realtime Biometrics Connection Diagram
Realtime Biometrics 401 F+ Setup Guide: Full Connection, Configuration & User Enrollment Tutorial
📝 Description:
Learn how to properly set up the Realtime Biometrics 401 F+ device, from unboxing and power connection to network setup, user enrollment, access control wiring, and attendance software integration. Perfect for HR, IT admins, and security professionals.
New 401 F + Connection Diagram

Realtime Biometrics 401 F+, Biometric Device Setup,
Fingerprint Attendance System, Face Recognition Attendance, Realtime 401F+ Configuration,
Time Attendance Machine, Access Control System, TCP/IP Biometric Setup,
Realtime Software Integration, How to install Realtime 401F+, Realtime device user
guide
📄 Google Blogger Post
Content:
✅ Step-by-Step Guide: Realtime
Biometrics 401 F+ Connection & Setup
Whether you're an IT technician, office administrator, or
security professional, setting up the Realtime Biometrics 401 F+ doesn't
have to be complicated. Follow this comprehensive, professional guide to
configure your device for attendance and access control with ease.
🔧 Step 1: Unbox and
Inspect the Device
Ensure all essential components are present:
- 401 F+
biometric device
- 12V DC
power adapter
- Mounting
plate with screws
- User
manual
- Optional
USB cable or flash drive
⚡ Step 2: Connect the Power
Supply
- Use a
12V DC, 1.5A adapter.
- Plug
into the port labeled DC 12V.
- Screen
should light up or beep upon startup.
🌐 Step 3: Network
Configuration (TCP/IP or Wi-Fi)
🔌 Wired LAN:
- Connect
Ethernet to RJ-45 port → router/switch.
- Navigate:
Menu > Comm > Network
- Set
Static IP, Subnet Mask, Gateway.
📶 Wi-Fi (If supported):
- Menu
> Comm > Wi-Fi
- Turn
Wi-Fi ON → Scan → Enter password.
🧑💼 Step 4:
Enroll Users
Navigate to Menu > User Management > Add User
- Assign
User ID
- Add
credentials:
- ✅
Fingerprint (scan 2–3 times)
- ✅
Face (align as guided)
- ✅
RFID Card (tap to scan)
- ✅
PIN (optional)
🔁 Step 5: Connect USB
(Optional Data Transfer)
- Insert
flash drive
- Use
for:
- User
backup/import/export
- Log
download
- USB
formatting
🔐 Step 6: Wire Access
Control System (If Required)
- Relay
Output: Connect NO, COM, NC to door lock
- Exit
Button: Connect IN + GND terminals
- Door
Sensor/Alarm (optional): Connect SENSOR input + Alarm output
🧪 Step 7: Test the System
- Verify
with registered biometric/PIN
- Check
for:
- Door
unlocking
- Log
entry saved
- Data
sync (via LAN/Wi-Fi)
💻 Step 8: Connect to
Attendance Software
- Install
Realtime Attendance Software on your PC
- Add
device using:
- IP
Address
- Device
ID
- Port
(default: 4370)
- Enable
user and log synchronization
📌 Final Tips & Tools
Checklist:
Task |
Tools Needed |
Device installation |
Drill, screws, wall plugs |
Power verification |
Multimeter (optional) |
Software configuration |
PC with LAN or Wi-Fi |
Door wiring |
Screwdriver, 2-core wire |
📥 Need Help?
For further support or firmware updates, visit the official Realtime
Biometrics website or contact their technical team.
ReplyDeleteThis is awesome!! I’ve always enjoyed reading your blog.
ai identity verification
best esign software